Flower Headband Costume Pattern
To make Flower Headband:
-
Print this page.
-
Determine the size in inches that you want the headband to be from top to bottom as shown in the below diagram with a tape measure.
-
Divide the size by 5. This will be the size in inches of each grid square.
-
Mark the grid intersections on the underside of your cloth. Each intersection should be spaced by the amount determined in step 3.
-
Connect the grid dots with a yardstick, and draw the flower shape onto your grid.
-
Cut 2 shapes from poster board.
-
Bend strips to wrap around ankles.
As an example, if you want your flower headband to measure 12 inches then 12/14 = .857. Convert this into 16th of an inch by multiplying by 16 and you get approximately 14/16" or 7/8" so the grid lines should be 7/8" apart.
